Troy 2103 Premium Aluminum Brightener
TROY 2103 PREMIUM ALUMINUM BRIGHTENER both chemically cleans and brightens in one easy operation. It is a very fast-acting material and will remove the heaviest diesel-made trails without hand-brushing. TROY 2103 PREMIUM ALUMINUM BRIGHTENER is usually used in a spray operation, followed by a pressure rinse. Spray from the bottom up; rinse from the top down. Flood the aluminum surface with sufficient material to form a heavy foam blanket. Allow 5 to 10 minutes’ contact time.
DIRECTIONS FOR USE
Use concentration varies with the condition of the surface to be cleaned. Start with a 1:7 to 1:10 dilution and vary the dilution to obtain optimum results. Detailed directions will be provided by your Troy Sales and Technical Service Representative.
WARNING: CONTAINS A BLEND OF ACIDS. CAUSES SEVERE BURNS AND SKIN IRRITATION WHICH MAY NOT BE IMMEDIATELY PAINFUL OR VISIBLE. KEEP AWAY FROM SKIN AND EYES.
SEE MATERIAL SAFETY DATA SHEET FOR THIS PRODUCT.
KEEP OUT OF REACH OF CHILDREN. FOR INDUSTRIAL USE ONLY.
To the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. User must contact Troy Chemical Industries, Inc. to verify correct data before specifying or ordering. No guarantee of accuracy is given or implied. We guarantee our products to conform to Troy Chemical Industries, Inc.’s quality control. We assume no responsibility for coverage, performance, or injuries resulting from use. Liability, if any, is limited to replacement of products. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY TROY CHEMICAL INDUSTRIES, INC. EXPRESS OR IMPLIED, STATUTORY BY OPERATION OF LAW OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.