Troy 2109 Rinse Additive and Rust Remover
TROY 2109 RINSE ADDITIVE AND RUST REMOVER is a blend of phosphoric acid and low-foam surfactants that can be used as a fluid rinse additive following phosphatizing, to eliminate toxic and hazardous chromic acid. It may be used as a Metal Preparation for Aluminum prior to painting.
DIRECTIONS FOR USE
TO USE AS A RINSE ADDITIVE: Use 1 quart per 100 gallons. Maintain pH at 3.5-5.5
TO USE AS A RUST REMOVER: Dilute 1 part product with 3 parts water.
TO USE AS AN ADDITIVE DURING PHOSPHATIZING: Add product to maintain pH between 3.5 and 4.0
TO USE AS A MILKSTONE: Add 1 quart product per 50 gallons of water. Circulate solution for 10-15 minutes, followed by a hot water rinse. Follow with an Alkaline rinse and, finally, with a cold water rinse. To use for ultrasonic use at 5-10%.
ALUMINUM PREPARATION PRIOR TO PAINTING: Mix with 4-8 parts water. Can be used or applied using a Lafferty Foam on Unit.
TO USE FOR ULTRASONIC CLEANING: Use at 5-10%.
CONTAINS PHOSPHORIC ACID. CAN CAUSE BURNS. CAUSES SKIN IRRITATION. KEEP AWAY FROM SKIN AND EYES. FOR INDUSTRIAL USE ONLY. KEEP OUT OF THE REACH OF CHILDREN.
To the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. User must contact Troy Chemical Industries, Inc. to verify correct data before specifying or ordering. No guarantee of accuracy is given or implied. We guarantee our products to conform to Troy Chemical Industries, Inc.’s quality control. We assume no responsibility for coverage, performance, or injuries resulting from use. Liability, if any, is limited to replacement of products. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY TROY CHEMICAL INDUSTRIES, INC. EXPRESS OR IMPLIED, STATUTORY BY OPERATION OF LAW OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.