image description

Troy 2802 Liquid Iron Cleaner & Phosphatizer

Troy 2802 Liquid Iron Cleaner & Phosphatizer

PRODUCT DESCRIPTION

TROY 2802 LIQUID IRON CLEANER & PHOSPHATIZER is a blend of acid salts, wetting agents and accelerators that will simultaneously clean and phosphatize ferrous surfaces in spray, soak or steam phosphatizing applications. TROY 2802 LIQUID IRON CLEANER & PHOSPHATIZER will form a uniform, dense phosphate coating that serves as an excellent paint base.

Parts, assemblies and components that are too large to process in spray washers or dip tanks can be cleaned and phosphatized with the use of a Malsbary 250 HPC unit. Dilutions have to be adjusted to meet individual equipment and requirements; however, as a guideline, prepare a 10% solution of TROY 2802 LIQUID IRON CLEANER & PHOSPHATIZER in the solution tank, which should be metered down to approximately 1% at the gun.

Meets the following MIL-SPEC requirements: MIL-C-490A GRADE II, MIL-C-46487 GRADE II, TT-C-490B TYPE II.

Your TROY representative will work with you to establish the proper procedures and dilutions.

 

USE CONCENTRATION

STEAM CLEANERS: 10% by volume in the concentrate tank, metered down to approximately 1% at the gun.

SPRAY WASHERS: 2 TO 5% by volume AT 145-160 Degrees F. Exposure time 1 to 2 minutes.

DIP TANK: 5 TO 10% by volume at 140-150 Degrees F. Immersion time 3 to 5 minutes.

 

WARNING

CONTAINS ACID PHOSPHATE SALTS. CAN CAUSE IRRITATION. AVOID CONTACT WITH EYES, SKIN AND CLOTHING. WASH THOROUGHLY AFTER HANDLING.

 

HANDLING PRECAUTIONS

Do not get in eyes, on skin or on clothing. Avoid breathing mists or sprays. Do not take internally. Wash thoroughly after handling. Keep container closed when not in use. Always wear rubber gloves, goggles and protective clothing when contact is likely. Always have a safety shower and eye wash fountain available for first aid.

 

KEEP OUT OF REACH OF CHILDREN – FOR INDUSTRIAL USE ONLY

SEE MATERIAL SAFETY DATA SHEET FOR ADDITIONAL INFORMATION PERTAINING TO THIS PRODUCT.

 

To the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. User must contact Troy Chemical Industries, Inc. to verify correct data before specifying or ordering. No guarantee of accuracy is given or implied. We guarantee our products to conform to Troy Chemical Industries, Inc.’s quality control. We assume no responsibility for coverage, performance, or injuries resulting from use. Liability, if any, is limited to replacement of products. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY TROY CHEMICAL INDUSTRIES, INC. EXPRESS OR IMPLIED, STATUTORY BY OPERATION OF LAW OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Resources