Troy 2824 Spray Wand Phosphatizer
TROY 2824 Spray Wand Phosphatizer is a combination of acid salts, wetting agents and non-molybdenum accelerators that will simultaneously clean and phosphatize ferrous surfaces in steam, hot high pressure washers or soak applications. Troy 2824 is also effective on galvanized and aluminum metals. Troy 2824 Spray Wand Phosphatizer leaves a dense grayish color phosphate coating. Coating weights average 10-25 mg./sq. ft. higher than with conventional products containing molybdate.
Steam Cleaner: 1% final dilution at the gun
Hot High Pressure Washer: 1 to 3% final dilution at the gun. 140 – 160°F.
Dip Tanks: 5 to 7% by volume at 140 to 160°F. 3-5 minutes contact time.
Do not get in eyes, on skin or on clothing. Avoid breathing mists or sprays. Do not take internally. Wash thoroughly after handling. Keep container closed when not in use. Always wear rubber gloves, goggles and protective clothing when contact is likely. Always have a safety shower and eye wash fountain available for first aid. Shelf life is 24 months.
KEEP OUT OF REACH OF CHILDREN – FOR INDUSTRIAL USE ONLY
SEE MATERIAL SAFETY DATA SHEET FOR ADDITIONAL INFORMATION PERTAINING TO THIS PRODUCT.
To the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. User must contact Troy chemical industries inc. to verify correct data before specifying or ordering. No guarantee of accuracy is given or implied. We guarantee our products to conform to Troy Chemical Industries Inc.’s quality control. We assume no responsibility for coverage, performance, or injuries resulting from use. Liability, if any, is limited to replacement of products. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY TROY CHEMICAL INDUSTRIES INC. EXPRESS OR IMPLIED, STATUTORY BY OPERATION OF LAW OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.