Troy 2828 Corrosion Inhibitor
TROY 2828 is a proprietary, non-foaming, water soluble acid/amine blend rust inhibitor for use in preventing flash rusting after phosphatizing and prior to painting. TROY 2828 is effective on cast iron, steel and other ferrous metals. TROY 2828 is safe on normal materials of construction of spray washers.
Appearance: Clear, heavy liquid
Solubility: Immediate and complete
Foam: Low to none
Use Concentration (Spray or Dip): 1 Quart/ 100 Gallons
Effective pH: 4.50 – 5.50
Temperature: Ambient to 140°F
Time: 30 seconds to 1 minute
TROY 2828 can be titrated with TROY Test Kit #2. See the Titration Procedures for complete instructions. The solution pH can be checked with pH paper or strips and the range can be maintained by the addition of TROY 2828.
MAINTENANCE: The tank life of TROY 2828 depends on an number of factors. The two most important are the work load and the amount of contamination carried over from the preceding rinse tank. Tanks of 500 gallons should be dumped once a week and 1000 gallon tanks should be dumped every two weeks. Larger tanks may be dumped less frequently.
CONTAINS AN AMINE/PHOSPHORIC ACID BLEND. CAN CAUSE IRRITATION.HANDLING
Do not get in eyes, on skin or on clothing. Avoid breathing mists or sprays. Do not take internally. Wash thoroughly after handling. Keep container closed when not in use. Always wear rubber gloves, goggles and protective clothing when contact is likely. Always have a safety shower and eye wash fountain available for first aid.
KEEP OUT OF REACH OF CHILDREN – FOR INDUSTRIAL USE ONLY
SEE MATERIAL SAFETY DATA SHEET FOR ADDITIONAL INFORMATION PERTAINING TO THIS PRODUCT.
To the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. User must contact Troy Chemical Industries, Inc. to verify correct data before specifying or ordering. No guarantee of accuracy is given or implied. We guarantee our products to conform to Troy Chemical Industries, Inc.’s quality control. We assume no responsibility for coverage, performance, or injuries resulting from use. Liability, if any, is limited to replacement of products. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY TROY CHEMICAL INDUSTRIES, INC. EXPRESS OR IMPLIED, STATUTORY BY OPERATION OF LAW OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.