Troy 2846 Non-Phosphate Conversion Coating
Troy 2846 Non-Phosphate Liquid Conversion Coating and Sealer is a unique combination of polymers and acid salts that does not contain any regulated heavy metals, organic accelerators, or phosphates. Troy 2846 Non-Phosphate Liquid Conversion Coating and Sealer helps produce high quality parts through superior salt fog resistance and paint adhesion while reducing the environmental footprint of the pretreatment line.
Deposits a reactive conversion coating on zinc, aluminum and ferrous metal surfaces.
- Phosphate-free chemistry
- Used at ambient temperatures
- No rinsing required
- Versatile. Used in recirculating washers and dip tanks.
- Improves corrosion resistance, even along scratches in the coating surface.
- Allows consolidation of stages and tanks
- Reduces overall chemical consumption
- Reduces process water requirements
- Reduces energy costs
- Eliminates phosphates in plant effluent
GUIDELINES FOR USE
Used at 2.0 – 3.0% concentration at ambient temperature with 45 – 65 seconds contact time. Lower concentrations require longer contact time, while higher concentrations (in excess of 3.0%) can cause flash rusting. Solution pH should be maintained above 3.0.
PACKAGING, STORAGE, AND HANDLING
- Troy 2846 Non-Phosphate Liquid Conversion Coating and Sealer is available in bulk, 275-gal. tote, 55-gal. drum, and 5-gal. pails.
- Product should be protected from extreme cold.
For additional product data or to obtain an MSDS contact your Troy representative
Do not get in eyes, on skin, or on clothing. Avoid breathing mists or sprays. Do not take internally. Wash thoroughly after handling. Keep container closed when not in use. Always wear rubber gloves, goggles and protective clothing when contact is likely. Always have a safety shower and eye wash fountain available for first aid.
KEEP OUT OF REACH OF CHILDREN – FOR INDUSTRIAL USE ONLY
SEE MATERIAL SAFETY DATA SHEET FOR ADDITIONAL
INFORMATION PERTAINING TO THIS PRODUCT.
To the best of our knowledge the technical data contained herein is true and accurate on the date of publication and is subject to change without prior notice. User must contact Troy Chemical Industries, Inc. to verify correct data before specifying or ordering. No guarantee of accuracy is given or implied. We guarantee our products to conform to Troy Chemical Industries, Inc.’s quality control. We assume no responsibility for coverage, performance, or injuries resulting from use. Liability, if any, is limited to replacement of products. NO OTHER WARRANTY OR GUARANTEE OF ANY KIND IS MADE BY TROY CHEMICAL INDUSTRIES, INC. EXPRESS OR IMPLIED, STATUTORY BY OPERATION OF LAW OR OTHERWISE, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.